Mushroom Cap Dragon - 3D printable files

The Mushroom Cap Dragon, was a stretch goal dragon from Talondryl's Journal of Everyday Dragons. It is a 3D printable beast with 23 pieces and 22 points of articulation. This creature prints in multiple parts and requires assembly. You will need to print 22 of your desired tightness of ball joint clips as well.

Can be scaled between 50%-100%, just remember to scale everything proportionally, including the ball joints clips.

Are these toys?

   No, not really. We are providing a digital model, it's up to you to print it and turn it into a physical item.  These are intended for display use, more like a poseable "Art Toy". Something to show off in your game room, or for nerdy decor.

   They are NOT intended/recommended for children under age 13. When 3D printed, the models have small pieces that could be a dangerous choking hazards for young children. Plastic can also fatigue over time which could cause small parts to break and be harmful if ingested. 

Recommended FDM Print Settings for dragon: 

*for the tall narrow pieces, a brim is helpful to achieve better bed adhesion.

• Nozzle: .4mm
• Layer Height: .2mm(thinner layers will give finer details.)
• Infill:10-15%
• Shells: 2
• Supports: NONE

Recommended FDM Print Settings for ball joint clips:

• Nozzle: .4mm
• Layer Height: .2mm(thinner layers will give finer details.)
• Infill:15-100% (try using max shells to make solid)
• Shells: 3 - 10 (if you want the clip joints to be firm, try printing them solid with full shells)
• Supports: NONE

*digital files only, you will receive the .STL files to 3D print this model yourself, no physical product will be shipped.

**Files/models for personal use, and subject to our terms of use.

A merchant license may be purchased to sell physical 3D printed versions of the designs. For more information, please CLICK HERE.